The CalUnitSystem (or Calibration Unit) is the ARGOS source used for AO calibration in day time. It creates 3 beams that mimics the 3 LGS beams: 532nm narrow band...
LgswDichroicSystemSX installation LgswDichroicSystemSX test We tested the movement of the dichroic and fold mirror both at Zenith and horizon using the DichroicS...
Fast guiding check w/ oscilloscope 11:30: Tommaso and Sebastian go on the telescope to check the Fast Guiding delay. We connect an oscilloscope after the 10x divi...
Description It is a rack mount 4U module containing 2 DichroicControllers, 1 LedSources, 1 web i/o interfaces. They are used for .... Documentation * Control ...
Tricks for calibration on sky * Loop Closed on a bright NGS star with FLAO only 36 modes to keep proper collimation * VibrationCompensation ON * Optimise...
1 Install site sx sim, e.g.: cd argos_trunk/site/sx sim make install 1 Follow instructions in README. Anonymous access with username anon and password...
How To Update The ARGOS Instrument Software During Commissioning It is essential that the engineers know exactly which software modules run during the commissioni...
Description Is the MoCon used in OAA before the delivery of the rack. It has a lot of binder connectors instead of 2 military circular connectors. It has not the ...
Description The swing arm controller is part of the CalUnitSystem developed and mantained by MPIA. Documentation about the controller can be found on MPIA Wiki pa...
Description This device monitors the temperature and humidity values of the LaserSystem. Documentation * User manual: http://abell.as.arizona.edu/~hill/xlbt...
Device We had this issue on BCU #1 and also on BCU #2 Description Quando si configura le 2 schede HVC, qualcosa va storto e la scheda di sotto non si configura...
Description The ARGOS vibration control system is designed to detect vibrations on the instrument optical path at a level sufficient to calculate and mitigate the...
Description The white light source is a subrack unit containing two Ocean Optics HL 2000 HP 232 halogen light sources and a Moxa NPort 5400 serial device server. ...
Description The ARGOS workstations. They are DELL PowerEdge R510 and R520 See the twiki of MPIA: https://svn.mpia.de/trac/gulli/argos/wiki/Workstations Refer to M...
Identification Dell R520 Setup as DX LGSW. On the rear side close to the 2 power supplies there is a label CSC2H5J (27834711895). This is the service tag. On the ...
Identification DELL R520 Setup as SX LGSW On the rear side close to the 2 power supplies there is a label H6W5ZX1. This is the service tag. The Express Service Ta...
Identification Dell R510 Setup as dx lalas. On the rear side close to the 2 power supplies there is a label with the service tag: ST38XJB5B and the Express Servic...
Identification Dell R510 Setup as sx lalas On the rear side close to the 2 power supplies there is a label with the service tag: ST48XJB5J and Express Serice Tag:...
This is a spare server currently located in Heidelberg (Faraday). Currently, the workstation is used for testing the software in simulation. Identification DELL ...
Currently, the workstation is located in Heidelberg (Faraday) and used as backup system. Identification * Dell R520 * On the front side there is a plastic ...
Currently, the workstation is located in Heidelberg (Faraday) and used for testing the software in simulation. Identification * Dell R520 * On the front si...