Identification
DELL R520
Setup as SX-LGSW
On the rear side close to the 2 power supplies there is a label
H6W5ZX1. This is the service tag.
The Express Service Tag is 37422124309. It is printed on a plastic card sliding from the front panel
On the top side (close to the front panel) there is the
MPIA ID ASTR04141700005
Known history
When |
Where |
Who |
What |
20130614 |
OAA |
DHL |
arrived and installed in the old rack |
20130617 |
OAA |
MB |
external ip configured to 193.206.155.161 and configuring devices |
20150618 |
OAA |
LB |
ready for shipping. em1 still with Arcetri's IP. To be removed and added to bond at telescope |
20150707 |
LBT |
LB, GOX |
Installed in LBTComputerRoomB, rack 14 |
Know issues
Current known config
Name |
IP |
MAC |
bond0 |
192.168.30.142 |
00:10:18:F7:80:04 |
em1 |
bond0 |
90:B1:1C:3D:A2:E5 |
em2 |
192.168.32.142 |
90:B1:1C:3D:A2:E6 |
p1p1 |
|
00:10:18:F7:80:04 |
p1p2 |
|
00:10:18:F7:80:04 |
p4p1 |
|
00:10:18:F7:80:04 |
p4p2 |
|
00:10:18:F7:80:04 |
[argos@sx-lgsw ~]$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.32.0 * 255.255.255.0 U 0 0 0 em2
192.168.30.0 * 255.255.255.0 U 0 0 0 bond0
link-local * 255.255.0.0 U 1003 0 0 em2
link-local * 255.255.0.0 U 1008 0 0 bond0
default 192.168.30.1 0.0.0.0 UG 0 0 0 bond0
[argos@sx-lgsw ~]$ cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
USERCTL=no
BOOTPROTO=none
ONBOOT=yes
IPADDR=192.168.30.142
NETMASK=255.255.255.0
NETWORK=192.168.30.0
GATEWAY=192.168.30.1
BONDING_OPTS="miimon=100 mode=802.3ad"
TYPE=Ethernet
MTU=9000
IPV6INIT=no
PEERDNS=no
[argos@sx-lgsw ~]$ cat /etc/sysconfig/network-scripts/ifcfg-em1
DEVICE=em1
BOOTPROTO=none
ONBOOT=yes
MASTER="bond0"
SLAVE="yes"
USERCTRL="no"
MTU=9000
[argos@sx-lgsw ~]$ cat /etc/sysconfig/network-scripts/ifcfg-em2
DEVICE=em2
BOOTPROTO=none
USERCTRL="no"
BROADCAST="192.168.32.255"
NETMASK=255.255.255.0
IPADDR=192.168.32.142
ONBOOT=yes
TYPE=Ethernet
MTU=1500
PEERDNS=no
IPV6INIT=no
Ethernet connections
The 6 ethernet ports are connected to switch 0206 as per Stephen email:
---------
For the aggregate, or port-channel, in the 192.168.30 please plug into the top switch on port 25, and port 27; and into the bottom switch on port 24, port 26 and port 28.
Port 29 on the top switch is in the 192.168.32.0 subnet.
---------
Previous config
copy and paste from above when config is changed
Maintenance
See
WorkStation
List of components devices
Reference
This topic is referred in:
ArgosSystemSx,
DayTime20150821,
DayTime20150827,
EngPanel,
VirtualBox
Topic label
 |  |
WorkStation2
|
aowiki.arcetri.astro.it/ARGOSPublic/WorkStation2 |