Max Planck Institut fur Astronomie Wolfgang, Jose and Martin: refer to them for any software related question about LGSW and computer configuration and mainteinan...
Occurence When notes 20130820 Description We got an error with opcode 202 on BcuNumber3 when writing into DSP memory during frame grabbing. This could...
Description Is the MoCon used in OAA before the delivery of the rack. It has a lot of binder connectors instead of 2 military circular connectors. It has not the ...
Description This cables connects the StepperMotorAdaptorBox to the MoCon. They are 1 to 1 cables with military connectors on both side. Each cable is used to cont...
How to route the calibration unit fibers Routing of the calibration unit fibers is critical. If the fibers are routed in the wrong way, the piezo head cables will...
Description Adaptor box is installed inside the LgswUnit. It gets up to 8 motor connected via DB9 connection on the internal side. On the external side it has 2 m...
Description Cables used to connect the PI S334 to the BCU. Each piezo head has 5 cables terminated with LEMO connectors: 3 for the HV commands (Axis 1, Axis 2, 10...
Is a goal of this topic Having a trace of every single occurred (or possibly occurred) bugs/failure in the hardware and/or software that is not fully understood ...
Description See attached email thread: MoCon pupilMotorBlue was not responding, but it recovers when commanded through IDL? Main.LorenzoBusoni 27 Mar 2013
Occurence When Notes 20130325 first noted Description Sequence: a,E,o,c = Camera is cooled and working, and we get frames. We stop during for a coupl...
Device This issues affects BCU #2 and maybe other BCUs since it seems to be a firmware issue Occurrence When Notes 20130312 First observed. Repeatable,...
Description the following code results in only diode 1 set to full current diode.setDiodeState(1,True) diode.setDiodeState(2,True) diode.setDiodeState...
Device The BCU #1 that was first delivered to Florence (and was before in Heidelberg for SW development). It is without ADC board, and was always affected by prob...
Description The table bolted to the rotator gallery on which the LgswUnit is clamped. It also hosts the cooling line manifold Documentation attach and describe ...