The list of targets and LUCI images is here:
raw_20141129.txt
21:00: we start the telescope collimation and we resume the tubone.
PatCam |
X |
Y |
Blue |
172 |
93 |
Yellow |
167 |
86 |
Red |
183 |
92 |
PatCam target: 20141130_054900: the target is offsetted by ~10px on the top direction. This is useful to use the centroid to periscope algorithm.
22:30: we acquire a new IM between periscope and
PatCam (centroid). The loop is closed on FLAO 150 modes to have a good stabilization of the LGS.
TN |
Notes |
20141130_070524 |
LAS compensation loop is open, LGS in |
20141130_070709 |
The FLAO is running at 100Hz... we switch to 500Hz. We take LUCI images, the Z stage is at 27mm.
23:30: we close on FLAO + ARGOS
PBL with ARGOS arbitrator. when restarted and we close the loop the shell RIPs because of an housekeeping error (mainly for bad voltage reading).
00:23: spots are on
PatCams but we cannot close on LGSW, we try optimizing the LAN focus + astigmatism correctors:
Hip28711
00:50: we repoint the telescope... We try to acquire a new IM between periscope and
PatCam (quad-cell). This works better!
TN |
Notes |
20141130_095940 |
G=2.5,0.6,0.4, TS off |
20141130_100041 |
^, TS on |
20141130_100304 |
^, Gj=0.2 |
20141130_100351 |
20141130_101008 |
G=3.0,0.7,0.7, Gj=0.1 |
20141130_101102 |
^, Gj=0.2 |
20141130_101247 |
G=3.0,0.6,0.6, Gj=0.25 |
20141130_101346 |
^, Gj=0.2 |
20141130_101441 |
^, Gj=0.1, seeing=*0.82"* |
20141130_102641 |
OL, spots are out of LGSW FoV |
20141130_102809 |
TN |
Notes |
20141130_103950 |
OL |
20141130_111843 |
Bad |
NGC2419
We set the FLAO stage to 45mm (where the guider focus is).
ToF set to 84us.
TN |
Notes |
20141130_124214 |
no tubone |
20141130_124245 |
The
BCU is continuing to crash. We set the frame rate to 200Hz.
TN |
Notes |
20141130_133049 |
OL |
20141130_135452 |
G=2.0,0.6,0.4 |
20141130_135554 |
20141130_135628 |
20141130_140536 |
OL |
--
MarcoBonaglia - 18 Dec 2014